Draytek Vigor2133 User Manual page 77

Connection for this
Channel
Open WAN Interface for
this Channel
ISP Access Setup, IP
Address From ISP, WAN IP
Network Settings, DNS
Server IP Address
After finished the above settings, click OK to save the settings and return to previous page.
Click any index (7, 8, 9 and 10) to get the following web page:
Available settings are explained as follows:
Item
Multi-VLAN Channel
Vigor2133 Series User's Guide
selected and the WAN. The WAN interface of the bridge
connection will be built upon the WAN type selected using
the VLAN tag configured.
Physical Members – Group the physical ports by checking the
corresponding check box(es) for applying the port-based
bridge connection.
Note: LAN port P1 is reserved for NAT use and cannot be
selected for bridging.
Check the box to enable relating function.
WAN Application
Management can be specified for general management

(Web configuration/telnet/TR069). If you choose
Management, the configuration for this VLAN will be
effective for Web configuration/telnet/TR069.
IPTV - The IPTV configuration will allow the WAN

interface to send IGMP packets to IPTV servers.
WAN Setup – Choose PPPoE/PPPoA or Static or Dynamic IP
to determine what WAN settings must be configured.
For other settings, refer to Details Page for PPPoE in WAN1.
Description
Enable – Click it to enable the configuration of this channel.
65