Draytek Vigor2133 User Manual page 591

object schedule set [INDEX] option
object schedule view [INDEX]
object schedule setdefault
S y n t a x
S y n t a x
Parameter
set
[INDEX]
option
-e [value]
-c [comment]
-D [year][month][day]
-T [hour][minute]
-d [hour][minute]
-a [value]
-I [value]
-h [option]
[day/date/cycle_days]
Vigor2133 Series User's Guide
D e s c r i p t i o n
D e s c r i p t i o n
Description
It means to set the schedule profile.
It means the index number (from 1 to 15) of the specified object
profile.
Available options for schedule includes:
-e , -c, -D, -T, -d, -a
It means to enable the schedule setup.
0 – disable
1 – enable
It means to set brief description for the specified profile.
The length range of the comment: 1 ~ 32 characters.
It means to set the starting date of the profile.
[year] – Must be between 2000-2049.
[month] - Must be between 1-12.
[day] - Must be between 1-31.
For example: To set Start Date 2015/10/6, type
It means to set the starting time of the profile.
[hour] - Must be between 0-23.
[minute] - Must be between 0-59.
For example: To set Start Time 10:20, type
It means to set the duration time of the profile.
[hour] - Must be between 0-23.
[minute] - Must be between 0-59.
For example: To set Duration Time 3:30, type
It means to set the action used for the profile.
[value] –
0:Force On, 1:Force Down, 2:Enable Dial-On-Demand, 3:Disable
Dial-On-Demand
It means to set idle time.
[value] – Must be between 0-255(minute). The default is 0.
Set how often the schedule will be applied.
[option] –
0: Once, 1: Weekdays, 2:Monthly, 3:Cycle days
[day] –
Sun, Mon, Tue, Wed, Thu, Fri, Sat
If the [option] set Weekdays, then must select which days of Week.
example: To select Sunday, Monday, Thursday, type
[date] : 1-28
[cycle_days] : 1-30
If the [option] set cycle days, then must select which days to do
cycle schedule
example: To select cycle 10 days:
> object schedule set 1 -D "2015 10 6"
> object schedule set 1 -T "10 20"
> object schedule set 1 -d "3 30"
579