Draytek Vigor2133 User Manual page 195

Repeater
Access Point Function
Status
After finishing all the settings here, please click OK to save the configuration.
Vigor2133 Series User's Guide
address after typing.
If you choose Repeater as the connecting mode, please type
in the peer MAC address (of VigorAP/Vigor router required to
make connection with such Vigor router and used to extend
the wireless signal) in these fields.
Four peer MAC addresses are allowed to be entered in this
page at one time. Similarly, if you want to invoke the peer
MAC address, remember to check Enable box in the front of
the MAC address after typing.
Click Enable to make this router serve as an access point.
When Repeater is set as WDS Mode, click Enable to use such
function.
Click Disable if Bridge is set as WDS Mode.
It allows user to send "hello" message to peers. Yet, it is
valid only when the peer also supports this function.
183