Draytek Vigor2133 User Manual page 136

Profile
Domain Name
Forwarding
DNS Server
You can set up to 120 LAN DNS profiles.
To create a LAN DNS profile:
1. Click any index, say Index No. 1.
2. The detailed settings with index 1 are shown below.
Available settings are explained as follows:
Item
Enable
Profile
Domain Name
IP Address List
124
Display the name of the LAN DNS profile.
Display the domain name of the LAN DNS profile.
Display that such profile is conditional DNS forwarding or
not.
Display the IP addres of the DNS Server.
Description
Check this box to enable such profile.
Type a name for such profile.
Note: If you type a name here for LAN DNS and click OK to
save the configuration, the name also will be applied to
conditional DNS forwarding automatically.
Type the domain name for such profile.
The IP address listed here will be used for mapping with the
domain name specified above. In general, one domain name
maps with one IP address. If required, you can configure two
IP addresses mapping with the same domain name.
Add – Click it to open a dialog to type the host's IP address.
Vigor2133 Series User's Guide