Initialization Form For I/O Type - Siemens SIMATIC S5 Manual

S5-115F Manual
I/O Type 15
S5-115F: Configuring the I/O Modules
I/O word
AI word
AI word
Analog input
Type number
Num. of I/O Channels :
Num. of sensors
Safety-related
Intermittent
Feedback modules required:
Check AQ 1-channel
4x Check DQ 2-channel
Status: TYPE INPUT
F1
SEARCH
• Signal group ( Vol. 1, 10.17 of the Manual)
• AI channel type ( Table 1.6)
• Lower/Upper check value: Enter the lower and upper check values from the raw vale range of
your analog signal here. The check values must be between 0 and 1535.
( Vol. 1, 10.11.4 of the Manual)
EWA 4NEB 811 6149-02
200
202
36
: 15 DB number
2 Signal group
: 2 Discr. crit.: Abs/Rel. to mean value: A
: Yes Discr. value (0 to 2048 / 1 to 100): 100
: No Valid value
CH AQ word
CH DQ byte ( 0 to 125):122 Half-byte(H/L):H
Check value (KH) Lower:
AI channel type
F2 F3 F4
COPY SWAP DELETE
Figure 1-32. Initialization Form for I/O Type 15
Configuring with COM 115F
COM 115F / PDC15
Type number
15
(4 to 255): 35
(0 to 28): 1
(1:min 2:max 3:mean):
(128 to 254): 242 Subunit: A
0 Upper :
(4 to 6): 4
F5 F6 F7
TYPES SAVE
3
1000
F8
RETURN
1-49