Initialization Form For I/O Type - Siemens SIMATIC S5 Manual

Configuring with COM 115F
I/O Type 10
S5-115F: Configuring the I/O Modules
Bits
DQ W 20
DQ W 22
Digital output
Type number
Num. of I/O Channels : 2
Safety-related
Intermittent
Feedback module required :
Readback DI 2-channel
Status: TYPE INPUT
F1
SEARCH
• An intermittent signal must be subject to sufficiently frequent status changes detectable by
the CPU. For this purpose, the signal must assume the states "0" and "1" for a period greater
than the PLC cycle time at least once within the second error occurrence time.
• Signal group ( Vol. 1, 10.17 of the Manual)
The signal group selected is always valid for the entire I/O word.
• DQ modules and R DI modules are assigned to each other wordwise.
Example:
DQs
38.0 38.1 38.2
R DIs
40.0 40.1 40.2
Note
When using DI/DQ module 482, outputs and readback inputs must always have the
same address.
1-42
0 1 2 3 4 5
10 10 10 10 10 10 10 10
20.0
: 10 DB number
Signal group
: Yes RB DI Byte addr. (0 to 127):
: No
F2 F3 F4
COPY SWAP DELETE
Figure 1-28. Initialization Form for I/O Type 10
38.3 38.4 38.5 38.6
40.3 40.4 40.5 40.6
COM 115F / PDC15
6 7 0 1 2 3
10 10 10 10
(4 to 255):
(0 to 28):
F5 F6
TYPES SAVE
38.7 39.0 39.1 39.2
40.7 41.0 41.1 41.2
S5-115F Manual
4 5 6 7
10 10 10 10
20
12
42
F7 F8
RETURN
39.3 39.4 39.5 39.6
41.3 41.4 41.5 41.6
EWA 4NEB 811 6149-02
39.7
41.7