Siemens SIMATIC S5 Manual page 237

Application
Configuring the two-channel digital output modules
Call the configuration form for I/O type 10
Select DQ word 4 with the cursor control keys
Enter type no. "10" in the field for bit 4.0 and terminate the input with <Return>
The cursor jumps to the configuration field
Enter the following in the configuration field
DB number (4 to 255):
Signal group (0 to 28):
R DI byte addr. (0 to 127):
Repeat the entries for addresses 36.1 to 39.7
(You can copy the configuration data of bit 36.0 also to addresses 36.1 to 39.7 1.2.2).
Figure 7-8 shows the finished entries.
I/O type 10
S5-115F: Configuring the I/O Modules
Bits
DQ-W 4
DQ-W
Digital output
Type number
Num. of I/O channels
Safety rel.
Intermittent
Feedback module required :
Readback DI 2-Channel
Status: TYPE INPUT
F1
SEARCH
Save your configuration data on the default program file by pressing F6
Terminate the input by pressing F8
7-10
20
12
4
0 1 2 3 4 5
10 10 10 10 10 10 10 10
4.0
: 10 DB number
: 2 Signal group
: Yes R DI Byte addr. (0 to 127):
: No
F2 F3 F4
COPY SWAP DELETE
Figure 7-8. Initialization Screen Form for I/O Type 10
COM 115F / PDC15
6 7 0 1 2 3
10 10 10 10
(4 to 255):
(0 to 28):
F5 F6
TYPES SAVE
S5-115F Manual
4 5 6 7
10 10 10 10
20
12
4
F7 F8
RETURN
EWA 4NEB 811 6149-02