Removing The Electrical Component - Yamaha 250GETO Service Manual

POWR
cC
To prevent damage to the engine or tools,
screw in the flywheel puller set bolts
evenly and completely so that the fly-
wheel puller is parallel to the flywheel
magnet.
NOTE:
Apply force to the crankshaft end until the fly-
wheel magnet comes off the tapered portion
of the crankshaft.
Flywheel puller: 90890-06521
4. Remove the Woodruff key.

Removing the electrical component

1. Remove the cover 1.
1
2. Remove the hour meter 2.
5-13
Power unit
6S350470
2
6S350410
3. Remove the stator assembly 3 pulser
coil assembly 4 and crank position sen-
sor 5.
3
4
5
4. Remove the starter motor 6.
6S350400
6
6S350390
6S35H11