Removing The Flywheel Magnet; Removing The Electrical Component - Yamaha 55DEHD Service Manual

POWR

Removing the flywheel magnet

1. Loosen the flywheel magnet nut.
1
cC
Apply force in the direction of the arrows
shown. While working, do not allow the fly-
wheel holder to slip off the flywheel mag-
net.
Flywheel holder 1 : 90890-06522
2. Install the special service tool, and then
remove the flywheel magnet.
2
5-11
Power unit
6F650200
6B450090
cC
To prevent damage to the engine or tools,
screw in the flywheel puller set bolts even-
ly and completely so that the flywheel
puller is parallel to the flywheel magnet.
NOTE:
Apply force to the crankshaft end until the fly-
wheel magnet comes off the tapered portion
of the crankshaft.
Flywheel puller 2 : 90890-06521
3. Remove the Woodruff key.

Removing the electrical component

1. Remove the spark plug caps.
2. Disconnect the charge coil coupler 1,
lighting coil leads 2, pulser coil coupler
3, PTT relay ground lead 4 (ET) and
Rectifier Regulator ground lead 5.
G/W
G
2
1
3
68850110
5
4
68850120
6885J11