Predelivery Check; Checking The Fuel System; Checking The Gear Oil - Yamaha 250GETO Service Manual

GEN
INFO

Predelivery check

To make the delivery process smooth and
efficient, the predelivery checks should be
completed as explained below.

Checking the fuel system

1. Check that the fuel hoses is securely
connected and that the fuel tank is filled
with fuel.
cC
For break-in period, use the fuel and oil
mixing ratio is 50:1. When finished it,
straight gasoline shall be used.

Checking the gear oil

1. Check the gear oil level.
1-25
General information
6S310010
69D10055
Checking the engine oil level
1. Check the engine oil level.
2. Fill in the engine oil into the remote oil
tank, turn the engine start swich to "ON"
and check that the oil injection system
automatically feed the engine oil from the
remote oil tank to engine oil tank.
3. Make sure the oil level is between the
upper 1 and lower level marks 2.
Recommended engine oil:
YAMALUBE 2-stroke outboard
motor oil
NOTE:
Make sure that air bleeding must be operate
after fill the engine.
Refer to the chapter 4, "Bleeding the oil
pump".
Checking the battery
1. Check the capacity, electrolyte level, and
specified gravity of the battery.
Recommended battery capacity:
CCA/EN: 711 A
20HR/IEC: 100 Ah
Electrolyte specified gravity:
1.280 at 20°C (68°F)
2. Check that the positive and negative bat-
tery cable are securely connected.
1
2
6S330250
6S35H11