Exhaust Cover; Removing The Exhaust Cover; Checking The Exhaust Cover; Checking The Pcv - Yamaha 250GETO Service Manual

Removing the exhaust cover

1. Remove the exhaust cover bolts in the
sequence shown.

Checking the exhaust cover

1. Check the exhaust cover for distortion or
corrosion. Replace the exhaust cover if
necessary.
6S35H11

Checking the PCV

1. Remove the pressure control valve.
2. Check the pressure control valve for
wear or deformation. Replace the control
valve if necessary.
3. Check the grommet for deformation.
Replace the grommet if necessary.
4. Check the spring for fatigue or deforma-
tion. Replace the spring if necessary.

Installing the PCV

1. Install a new gasket 1 and the pressure
control valve 2 with the its rounded side
6S350250
facing towards the exhaust cover, and
then tighten the bolts to the specified
torque.
6S350260

Exhaust cover

1
PCV cover bolt:
11 N·m (1.1 kgf·m, 8.1 ft·lb)
1
2
3
4
5
2
6
6S350290
7
8
9
5-20