Checking The Engine Stop Lanyard Switch; Checking The Starter Relay - Yamaha 250GETO Service Manual

Checking the engine stop lanyard
switch
1. Check the engine stop lanyard switch for
continuity. Replace if there is no continu-
ity.
a
1
2
Switch
position White (W) 1 Black (B) 2
Lock plate
removed a
Lock plate
inserted b
6S35H11
Ignition and ignition control system/Starting system
b
6F680165
Lead color

Checking the starter relay

1. Remove the starter relay 1.
2. Connect the digital circuit tester leads to
the starter relay terminals.
3. Connect the positive battery terminal to
the brown (Br) lead 2.
4. Connect the negative battery terminal to
the black (B) lead 3.
5. Check for continuity between the starter
relay terminals. Replace the starter relay
if there is no continuity.
6. Check that there is no continuity between
the starter relay terminals after discon-
necting a battery terminal from the brown
2 or black lead 3. Replace the starter
relay if there is continuity.
1
1
2
6S380180
3
4
5
6
2
7
3
6G480196
8
9
8-16