Device Information Configuration; Table 3 - Device Information Parameters - Honeywell SmartLine STT700 HART User Manual

4.3.2 Device Information Configuration

In this and subsequent procedures, the notations R for read only and R/W for read/write are used to
indicate if a parameter can be edited.
1. On the DE MAIN MENU, select Device Info. The DE DEVICE INFO box will be displayed.
Typical DE device information with type and firmware detail is shown here.
2. DE DEVICE INFO parameter attributes and details, Table 3.
Parameter
Tag ID
Type
DE Firmware
PROM ID Number
Scratch Pad
Dev FW
3. Select the Back button to go back to the DE MAIN MENU.
Revision 1
Table 3 – Device Information Parameters
Read (R) or
Configuration Details
Read/Write (R/W)
R/W User ID up to 8 alphanumeric characters.
Manufacturer's device type identifier
R
Manufacturer's firmware version identifier
R
R PROM ID Number
R/W Up to 32 alphanumeric characters
R DE PWA firmware version
STT700 Series HART/DE Option User's Manual
Page 21