Table 12 - Monitor - Honeywell SmartLine STT700 HART User Manual

Online Menu Flow
Monitor/Dashboard
Online/Device
Setup/Monitor/Dashboard
Monitor/Dashboard/Process Monitoring
Online/Device
Setup/Monitor/Dashboard
/Process Monitoring
Revision 1
Table 12 – Monitor
Parameter menu/ name
PV LRV
PV URV
PV LTL
PV UTL
PV Delta
PV Meter
PV [Loop]
Trend of PV
SV Meter
SV [Cold Jn.
Temperature]
Trend of SV
STT700 Series HART/DE Option User's Manual
Description/Valid values
Displays the current value of the Lower
Range Value (input which represents 0%
output) in user selected engineering
units. This value may be configured to any
value within the range as per selected loop
control mode (It will be computed depending
on LTL1, UTL1, LTL2 and UTL2.
Displays the current value of the Upper
Range Value (input which represents 100%
output) in user selected engineering
units. This value may be configured to any
value within the range as per selected loop
control mode (It will be computed depending
on LTL1, UTL1, LTL2 and UTL2.
Lower Transducer Limits
Upper Transducer Limits
Read only parameter
Displays the absolute difference between
the two measured temperature inputs
(Sensor 1 temperature value - Sensor 2
temperature value).
Displays a gauge meter representation of
the current value of the Primary Variable
(temperature input)
Displays the current value of the Primary
Variable (temperature input) in user selected
engineering units
Displays a trending chart of the current
value of the Primary Variable (temperature
input).
Displays a gauge meter representation of
the current value of the Secondary Variable
(CJ temperature).
Displays the current value of the Secondary
Variable (CJ temperature) in user selected
engineering units.
Displays a trending chart of the current
value of the Secondary Variable (CJ
temperature)
Page 51