8 HART Advanced Diagnostics
8.1 About This Section
This section provides information about the Advanced Diagnostic features in the STT700 SmartLine
Temperature Transmitter.
8.2 Advanced Diagnostics
What you want to view
Advanced Diagnostic menu parameters are:
Installation and Device Life
Operating Voltage
Core Temperature Diag
Power-up diagnostics.in Advanced Diagnostic
menu parameters are:
Installation and Device Life
Operating Voltage
Core Temperature Diag
Power-up diagnostics.
PV Tracking Diagnostics
Cold Jn. Temperature Tracking
Diagnostics
8.2.1
Transmitter Install Date
Online\Device
Setup\Basic
Configuration\General
Revision 1
Table 14 – Viewing Advanced Diagnostics
Transmitter
Description
Install date
Set-up
STT700 Series HART/DE Option User's Manual
What to do
Select Start/FDC to Launch the FDC application
on the MC Toolkit.
On the Home page, select Online and establish
connection with the device.
Select My Device\Device
Setup\Monitor\Diagnostics\Adv Diagnostics.
Select Start/FDC to Launch the FDC application
on the MC Toolkit.
On the Home page, select Online and establish
connection with the device.
Select My Device\Device
Setup\Monitor\Diagnostics\Variables Monitoring.
Date of device installation. Date displayed in
mm/dd/yyyy format where mm=month,
dd=day, yyyy=year
User enters a date once during device lifetime.
Once date is entered no further updates are
possible and value becomes read only and is
permanently saved.
Page 91