Device Information Configuration; Table 4 - Device Information Parameters - Honeywell ST 800 Series User Manual

Device Information Configuration

In this and subsequent procedures, the notations R for read only and R/W for read/write are used to
indicate if a parameter can be edited.
1. On the DE MAIN MENU, select Device Info. The DEVICE INFO box will be displayed.
2. Configure device information according to Table 4.
Parameter
Tag ID
Type
Firmware Version
PROM ID Number
Scratch Pad
3. Select the Back button to go back to the DE MAIN MENU.
Page 14
Table 4 – Device Information Parameters
Read (R) or
Configuration Details
Read/Write (R/W)
R/W User ID up to 8 alphanumeric characters.
R Manufacturer's device type identifier
R Manufacturer's firmware version identifier
R PROM ID Number
R/W Up to 32 alphanumeric characters
ST 800 Series HART/DE Option User's Manual Revision 5.0