Device Health; Device Icon / Honeywell Logo; Process Variables; Shortcuts - Honeywell SmartLine STT700 HART User Manual

10.6.1 Device Health

Device Health shows Overall Device Status Image and "Device Status" Button/Link will invoke the
Device Status screen.
Overall Device Status will be either Normal, Warning or Failure depending upon the health of the
device:
Overall Device Status will be shown on each of the DTM pages so that the current status
of the device is visible from any screen

10.6.2 Device Icon / Honeywell Logo

This will display the Honeywell Logo, Transmitter icon.

10.6.3 Process Variables

The Process variable displayed will be PV, SV, TV, QV, % Range and Loop Current.

10.6.4 Shortcuts

Device Setup has four (4) different menus: 1.Basic Configuration Menu 2.Advanced Configuration
Menu 3.Monotor Menu 4.Review Menu. Details are shown below.
1. Basic Configuration
This menu item facilitates configuration of basic items like transmitter install date, tag, long tag, date,
descriptor, final assembly number, message, PV/SV units, PV URV / PV LRV, PV damp, NAMUR,
poll address, loop current mode etc.
2. Advanced Configuration
This menu item facilitates the configuration of temperature measurements for the connected input
sensor types, loop control modes, sensor type configuration, calibration of sensors, latching, master
reset, write protect, device lock/unlock etc.
3. Monitor
This menu item provides visualization of the complete picture of the device like device health status,
device information, process variables tracking, advanced diagnostics, error logs and MSG (model
selection guide) details.
4. Review
This menu item will show the complete picture of device configuration parameters .
Refer to the Table 9 for more details
Page 106
STT700 Series HART/DE Option User's Manual
Revision 1