De-Specific Configuration Parameters; Table 5 - De Configuration Parameters - Honeywell SmartLine STT700 HART User Manual

4.3.4 DE-Specific Configuration Parameters

Select the Configure button, and configure parameters. See Table 5.
Read (R) or
Parameter
Read/Write (R/W)
LRL
URL
LRV
URV
PV Units
SV Units
Sensor Type
Damping
Span
dual input model
*A cannot be configured
Select the Back button to go back to the DE MAIN MENU.
4.3.4.1 Notes on Damping (Digital Noise Reduction)
You can adjust the damping time to reduce output noise. In general, set damping to the smallest value
reasonable for your process.
Revision 1
Table 5 – DE Configuration Parameters
Configuration Details
R Lower Range Limit, Floating Point
R Upper Range Limit, Floating Point
R/W Lower Range Value, Floating Point
R/W Upper Range Value, Floating Point
R/W Process Variable Units: scaling value selection;
R/W Secondary Variable scaling units:
R/W Sensor type used in the Transmitter*
R/W
Select digital noise reduction; (see note below)
Process Range: URV – LRV, Floating Point
R
as a single input model.
STT700 Series HART/DE Option User's Manual
o o
C or F
Page 23