Pausing Copy When Using Finisher - Ricoh feeder Troubleshooting Manual

Adding paper, Toner and Staples

Pausing Copy When Using Finisher

You can pause a large volume of copies when using Finisher.
A
Press the {Suspend/Resume} key.
The key lights up.
5
B
Remove the stack of paper from the finisher shift tray.
C
Press the {Suspend/Resume} key.
The key turns off, and then copying restarts.
Note
❒ You can suspend copy only when the output tray is specified as the finish-
er shift tray.
86
ANQ082S
ANQ083S