Ricoh feeder Troubleshooting Manual page 94

Adding paper, Toner and Staples
Important
❒ Faults may occur if you use toner other than the recommended type.
❒ When adding toner, do not turn off the operation switch. If you do, settings
will be lost.
❒ Always add toner when the machine instructs you.
❒ Do not use recycled toner. This will damage the machine.
❒ During toner adding, the toner bottle is rotating. Do not touch the toner bot-
tle.
❒ If toner remains in the bottle, you cannot remove the bottle. Do not remove
the bottle forcibly.
❒ Be sure to set the new toner bottle in the lower hole first.
❒ Store toner containers in a cool, dry place free from direct sunlight.
❒ Store toner on a flat surface.
Note
5
❒ If both toner bottles are empty, D will appear.
❒ You can still make about 200 copies after D appears, but replace the toner ear-
ly to copy degradation.
❒ If one of the toner bottle is empty, you can keep copying by using the other
bottle.
❒ You can change the toner bottle during copying.
❒ If toner remains in the bottle, you cannot pull it out.
❒ When you change one toner bottle, do not touch the other one.
❒ Press [System Status] to check contact number for consumables' order. For sys-
tem status, see p.5 "Checking Machine Status and Settings".
88