Removing Punch And Staple Waste; Finisher - Ricoh feeder Troubleshooting Manual

Clearing Misfeeds

Removing Punch and Staple Waste

This section explains how to remove punch and staple waste.
Note
❒ While "
Hole Punch Receptacle is full.
cle is full.
function.

Finisher

The following procedure explains how to remove punch and staple wastes from
the Finisher.
• Remove punch wastes
6
• Remove staple wastes
Note
❒ If the message is still displayed, reinstall the waste box.
108
" is displayed, you cannot use the Punch function or the Staple
" or "
Waste Staple Recepta-
ANR025
ANR024