Ricoh feeder Troubleshooting Manual page 66

Troubleshooting When Using the Scanner Function
Message
Memory is full.
Do you want to
store scanned
file?
No paper. Load
paper of one of
the following
sizes, then press
[Start Printing].
Exceeded max. data
capacity.Check
4
the scanning reso-
lution, then reset
original(s).
Exceeded max. data
capacity.Check
scanning resolu-
tion, then press
Start key again.
Exceeded max.
page capacity per
file. Press
[Send] to send
the scanned data,
or press [Cancel]
to delete.
60
Cause
Because there is not
enough free hard disk
space in the machine for
storing in the Document
Server, only some of the
pages could be scanned.
No paper is set in the
specified paper tray.
The scanned original ex-
ceeded maximum data
capacity.
The scanned data exceed-
ed maximum data capac-
ity.
The number of scanned
pages exceeded maxi-
mum page capacity.
Solution
Specify whether to use the data or not.
Load paper of the sizes listed in the
message.
Specify the scan size and resolution
again. Note that it may not be possible
to scan very large originals at a high
resolution. See "Relationship between
Resolution and File Size", Scanner Ref-
erence.
Specify the scan size and resolution
again. Note that it may not be possible
to scan very large originals at a high
resolution. See "Relationship between
Resolution and File Size", Scanner Ref-
erence.
Select whether to send the data so far.