Ricoh feeder Troubleshooting Manual page 37

Problem
In Margin Adjustment
mode, parts of the origi-
nal image are not copied.
In Image Repeat mode,
the original image is not
copied repeatedly.
❖ Stamp
Problem
The stamp position is
wrong.
The stamp is not printed
on the back side of sheets
when duplex copying.
❖ Combine
Problem
You cannot make a book
from Booklet or Maga-
zine mode by folding
copies.
When using Combine,
parts of the image are not
copied.
Copies are not in correct
order.
Cause
There is a lack of margin
space on the opposite
side of the binding posi-
tion.
You selected copy paper
the same size as the origi-
nals, or you did not select
the proper reproduction
ratio.
Cause
The paper orientation is
wrong.
The back side stamp posi-
tion is incorrect for the
paper size.
Cause
You selected a setting
("Open to left"or "Open
to right") that does not
match the orientation of
originals.
You specified a reproduc-
tion ratio that does not
match the sizes of your
originals and copy paper.
You placed the originals
in the incorrect order.
When You Cannot Make Copies As Wanted
Solution
Set a narrower margin with User Tools.
You can set the width between 0 - 30
mm (0" - 1.2").
See "Front Margin: Left/Right", "Back
Margin: Left/Right", "Front Margin:
Top/Bottom" and "Back Margin:
Top/Bottom", General Settings Guide.
Select copy paper larger than the origi-
nals or select the proper reproduction
ratio.
Solution
Check the paper orientation and stamp
position.
Reset the back side stamp position. See
"Back Side Stamp Position in Duplex",
General Settings Guide.
Solution
Change the setting. See "Orientation:
Booklet, Magazine", General Settings
Guide.
When you specify a reproduction ratio
using Manual Paper Select mode, make
sure that the ratio matches your origi-
nals and the copy paper. Select the cor-
rect reproduction ratio before using
Combine mode.
When placing a stack of originals in the
ADF, the last page should be on the bot-
tom.
If you place an original on the exposure
glass, start with the first page to be cop-
ied.
2
31