Paper Feed, Separation And Pickup Rollers - Ricoh LCIT RT5130 Field Service Manual

2.Replacement and Adjustment
Push the slide rails [A] into the machine.
5.
Remove the screw [A] at the rear.
6.
Pull out the middle tray.
7.
Pull the paper feed unit with stay [A], and then move it to the right-lower side (
8.
Remove the stay [B] (
9.
10. Remove the paper feed unit [C]

Paper Feed, Separation and Pickup Rollers


Before doing this procedure, turn OFF the power of the main machine, and disconnect it from
its power source.
36
x 2)
x 2, x 2).