Recommended Paper - Ricoh A251 Operating Instructions Manual

RECOMMENDED PAPER

Standard paper sizes that can be used in this copier are shown below.
Metric version
A0
A1
A2
A3
A4
When you make a copy on a non-standard size of paper, set the paper on the Copy Paper Table.
Weight of paper suitable for this copier: 51g/m
Do not use the following kinds of paper or a paper jam might occur.
• Bent, folded, or creased paper
• Torn paper
• Perforated paper
• Non-smooth paper
• Slippery paper
• Thin paper that has low stiffness
Do not make a copy on paper with any kind of coating, such as thermosensitive paper, art paper,
aluminium foil, and carbon paper.
A fault might occur.
Do not use paper with strong curls at the edges or corners. (Curls rising more than 5mm(1/4") or
falling more than 20mm (3/4") over a 40mm (1.5") radius.)
When you make copies on film, take out the copies delivered to the copy guide one sheet at a time
and place them on a flat surface.
10
Inch version
E (36" 48")
D (24" 36")
C (18" 24")
B (12" 18")
A ( 9" 12")
Bypass
K
K L
K L
K L
K
2
, 14lb to 134g/m
Roll Feeder
K
K L
K L
K L
K
2
, 36lb.