Variable Cutting - Ricoh A251 Operating Instructions Manual

Variable Cutting

This function cuts roll paper in a length you specify.
Notes
The variable cut can handle the cut length from 245 to 2,000mm, 9.6" to78.7".
1 Press the Preset Cut key. The "Preset/Variable" indicator lights up and the "Paper Length"
display shows the default Preset Cut length. (1189mm, or 48.0").
2 Press the Preset Cut key to display the nearest value you want.
3 Press key or – key to specify the most appropriate length.
4 Choose any copy settings you require.
5 Press the RF Select key to turn on the "RF Select" indicator.
6 Continue from step4 on page 20.
Paper Length
Cut Select
Semi Synchro
Preset/
Variable
Preset Cut
Leading Edge
Copy Counter
Function Select RF Select /Cut Copy Media Lighter
Clear Modes/
Energy Set
Energy Saver
Saver Original
Set RF
Paper Select
Wait
Lighter Copy
Vellum
Film
Darker Clear/Stop
Emergency Stop
Program
23