NOTE: Regarding paper sizes that can be set,
NOTE: If you want to change the paper size,
NOTE: For details about non-recommended copy paper and notes for copy
paper,
Non-recommended Paper For Paper Tray
Folded, curled, creased, or damaged paper
Torn paper
Perforated paper
Paper with conductive or low electrical resistance coating such as carbon or
silver coating
Thermal paper, art paper
Thin paper that has low stiffness
Notes For Paper
Load paper with the copy side down in the tray, and with the copy side up in
the bypass feed table. If copies are curled, try turning the copy paper over in
the tray. If there is no improvement, change to copy paper with less curl.
Correct curls in copy paper before loading.
Fan copy paper to get air between the sheets before loading.
When making two-sided copies, do not load paper in the paper tray for copying
the reverse side. Use the the bypass feed table.
see page 16 .
LOADING PAPER
see page 16.
see page 56 .
LOADING PAPER
47