Ricoh A251 Operating Instructions Manual page 24

4 Make sure that the "Set Paper" indicator is lit.
If it is off, press the Energy Saver key to exit Energy Saving mode.
5 If any previous settings remain, press the Clear Modes key.
6 Set the density, the number of copies, and other optional settings you require such as Leading
Edge.
7 Set the paper along the size indication on the
Copy Paper Table. Or set the Paper Guides
(option), to match the paper width.
8 Slide the paper straight into the copier until it
stops. The copier will soon pull it in.
Paper Length
Cut Select
Semi Synchro
Preset/
Variable
Preset Cut
Leading Edge
Copy Counter
Function Select RF Select /Cut Copy Media Lighter
Clear Modes/
Energy Set
Energy Saver
Saver Original
Set RF
Paper Select
Wait
Lighter Copy
Vellum
Film
Darker Clear/Stop
Emergency Stop
A1 A2
A2 A3
Program
SB007
SB008
15