Non-Recommended Paper For Paper Trays; Notes For Paper - Ricoh Aficio FT4027 Operating Instructions Manual

NOTE: Regarding paper sizes that can be set,
NOTE: If you want to change the paper size,

Non-recommended Paper For Paper Trays

5
Folded, curled, creased, or damaged paper
5
Torn paper
5
Perforated paper
5
Paper with conductive or low electrical resistance coating such as carbon or silver
coating
5
Thermal paper, art paper
5
Thin paper that has low stiffness

Notes For Paper

5
Load paper with the copy side down in the 250-sheet and 500-sheet trays, and
with the copy side up in the large capacity tray. If copies are curled, try turning
the copy paper over in the tray. If there is no improvement, change to copy paper
with less curl.
5
Do not use copy paper that has been already copied on.
5
The following types of paper cannot be fed from the paper tray. Load them in the
bypass feed table.
• OHP transparencies
• post cards
5
Correct curls in copy paper before loading.
5
Fan copy paper to get air between the sheets before loading.
See page 45.
• adhesive labels
IS LIT: LOADING PAPER
see pages 110 and 113 ~ 114.
see page 108.
• translucent paper
IS LIT: LOADING PAPER
95