B) Changing The Default Setting - Ricoh A251 Operating Instructions Manual

B) Changing The Default Setting

1 Turn the main switch off.
2 Hold down the Emergency Stop key, then turn
the copier back on.
The jam and service indicators will blink.
3 Input the settings you want.
4 Turn the main switch off.
The next time you turn the copier on or press the Clear Modes key, the settings you programmed in
step 3 will take effect.
34
Energy Set
Saver Original
Wait
Lighter Copy
Vellum
Film
Copy Media Lighter Darker
Emergency Stop
SM067
Clear Modes/
Energy Saver
Program
Clear/Stop