Copying Onto Roll Paper - Ricoh A251 Operating Instructions Manual

COPYING ONTO ROLL PAPER (OPTION)
To make a copy using the Roll Feeder option, you do not need to set paper on the copy table; the paper
will be fed to the copier from the Roll Feeder. You can copy onto roll paper using the following
techniques:
—Synchro cutting
—Preset cutting
—Variable cutting
Notes
If unused roll paper is left in the copier, cut 700mm (28") from the edge of the paper before you
start copying.
When you want to copy long originals, the curled originals, or thin originals (less than 0.1mm)
which can be easily bent down, open the guide to keep the original away from the paper entrance.
CAUTION : If during copying your original gets stuck in the copier, press the
Emergency Stop key.
If you stop the operation by pressing this key, remove both the
original and paper.
SM058
19