Ricoh A251 Operating Instructions Manual page 100

4 Make sure that the "Set Paper" indicator is lit.
If it is off, press the Energy Saver key to exit Energy Saving mode.
5 If any previous settings remain, press the Clear Modes key.
6 Set the density, the number of copies, and other optional settings you requires such as Trailing
Edge.
7 Set the paper along the size indication on the
Bypass Table.
Slide the paper straight into the copier until it
stops. The copier will soon pull it in.
8 Set the Original Guide to match the original
width.
Paper Length
Cut Select
Synchro
Preset/
Variable
Preset Cut
Leading Edge
Trailing Edge
Copy Counter
Bypass Select/
Function Select Roll Paper Cut
Energy Set
Saver Original
Wait
Lighter Copy
Vellum
Film
Copy Media Lighter Darker
Emergency Stop
Clear Modes/
Energy Saver
Program
Clear/Stop
SM006
SM057
15