B) Changing The Default Setting - Ricoh A251 Operating Instructions Manual

Recalling Settings Stored In The Program key
1 Press the Program key before copying.
2 Enter the number of copies required with the
plus and minus key.
3 Make a copy.

B) Changing The Default Setting

1 Turn the main switch off.
2 Hold down the Emergency Stop key, then turn
the copier back on.
The jam and service indicators will blink.
3 Input the settings you want.
4 Turn the main switch off.
The next time you turn the copier on or press the Clear Modes key, the settings you programmed in
step 3 will take effect.
Energy Set
Saver Original
Set RF
Paper Select
Wait
Lighter Copy
Vellum
Film
Copy Media Lighter Darker
Emergency Stop
Energy Set
Saver Original
Set RF
Paper Select
Wait
Lighter Copy
Vellum
Film
Copy Media Lighter Darker
Emergency Stop
Clear Modes/
Energy Saver
Program
Clear/Stop
Clear Modes/
Energy Saver
Program
Clear/Stop
35