6 Center your original
Table. Slide the original straight into the copier
until the copier pulls it in.
7 Just as the trailing edge of the original passes
the horizontal line of the Semi-auto synchro
cut mark, press the Cut key.
Notes
To cancel copying, press the Clear/Stop key. The copier finishes the operation in progress, and
delivers the copy and the original.
To call off on-going copying, for example, when you have inserted a wrong blueprint, press the
Cut key. The machine interrupts the operation in progress, and delivers the copy and the original.
face up
on the Original
A2
A3
A4
SB015
A4
A3
A2
A3
SB016
21