Using The Rear Table - Ricoh A251 Operating Instructions Manual

Using the Rear Table

When you copy the following originals, set them in the Rear Table.
• Thick originals (0.19mm, 35
• Originals which cannot be folded.
• Originals less than 297mm (12") in width and more than 1200mm (47") in length.
Notes
You cannot use the following function using the Rear Table.
— Repeated Coping
— Semi Synchro Cut with roll paper
— Partial Copying
1 Choose any copy setting you require.
2 For mannual copying, set paper.
3 Pull up the holder and turn in the copy exit
guide.
4 Insert the original
Table.
5 Hold and take the original which has been
read and delivered in the front of the copier.
18
1mm).
face down
from the Rear
SB012
SB013