Auto On Line - Ricoh Priport JP5000 Operating Instructions Manual

Auto On Line

You can select whether the machine
automatically switches to On Line
mode when it receives data from a
PC.
Preparation
• The default setting for On Line
mode is On. However, you can
change the setting to Off if re-
quired.
• You can press the { { { { Auto On Line} } } }
key to switch Auto On Line on
or off. If the Auto On Line indi-
cator is lit, Auto On Line is ac-
tive. If the indicator is off, Auto
On Line is inactive.
• When the Auto On Line indica-
tor is lit, Auto On Line has pri-
ority when data is received
from a PC. If you want to pre-
vent the machine from inter-
rupting a print job when it
receives data from a PC, press
the { { { { Auto On Line} } } } key so the
Auto On Line indicator goes off
and Auto On Line becomes in-
active.
A A A A
Press the { { { { Auto On Line} } } } key.
Stamp
Make-Up
Over lay
Skip Feed Edge Erase
Image Density
Lighter On Line
Normal
Darker 1
Auto On Line
Darker 2
Economy Mode
Original Storage
Job Separator
ZDZS160N
On Line Printing
1
81