Ricoh Priport JP5000 Operating Instructions Manual page 188

What To Do If Something Goes Wrong
- When a service call message is displayed in the panel display -
- -
Press the [Exit] key. Then turn the main switch off and on. If a service code ap-
pears again, contact your service representative.
Note
If a service code appears on the panel display after you turn the main switch
off and on a few times, do not continue turning it on and off. Leave the ma-
chine off.
When you make masters continuously using originals with solid images, SC-
03-03 tends to appear on the panel display. In this case, turn off the main
switch and wait for a while. Then turn on the main switch.
4
166