Ricoh Priport JP5000 Operating Instructions Manual page 77

Auto Class Mode— Making Variable Numbers Of Prints From The Same Original Using Stored Data
key and press the [Cancel]
key.
Repeat steps A and B until
you have finished selecting
all the desired classes.
E
Press the [OK] key.
F
Set one original on the exposure
glass (contact glass) or in the op-
tional document feeder.
G
Press the { { { { Start} } } } key.
Program Clear Modes
Enter
Clear/Stop
H
Check the image position of the
trial or proof print.
Note
If the image position is not cor-
rect, adjust it using the [Image
=] key (see
Print Image Position").
I
Make your prints.
Auto Cycle
Proof
Print
Start
TPES050N
P.25 "Adjusting
1
55