Table of Contents
Advertisement
Diagonal line method
A diagonal line must be drawn through the area that you wish to edit.
1.
Put the command sheet on top of the original.
2.
Draw a line using a felt tip pen (black, red or blue) with a thickness of at least 1mm.
• Make sure there is no break in the line.
• The diagonal line can be drawn from left to right or vice versa.
• Draw the line at least 2mm (0.08 inches), away from the image so that the whole image can be
recognized.
c
d
• a, b, c, d = 2mm (0.08 inches)
• The line marking the designated area should be more than 2mm (0.08 inches), from any
neighboring image.
ZM-20
ZM-21
a
b
GRCOMM1E
Command Sheets for Make-Up Printing
115
Advertisement
Table of Contents
