Ricoh Priport JP5000 Operating Instructions Manual page 66

OPERATION
A
Press the [Ppr. Type] key.
1
B
Select [User 1] or [User 2] with the
[ ], [ ], { { { { ~ ~ ~ ~ } } } } , or { { { { } } } } } } } } key.
C
Press the [OK] key.
- To prevent paper misfeeds: -
- -
If paper misfeeds occur frequently
even if you select the proper paper
type, follow the steps below.
A Press the [Ppr. Type] key.
44
B
Select one of the paper types with
the [ ], [ ], {~}, or {}} key.
TPES520E
C Press the [Select] key.
D Select the paper misfeed condition
with the {~}, {}}, {|}, or {{}
key.
TPES530E
E Press the [OK] key.
If the paper misfeeds occur frequent-
ly in the paper exit section even if you
use standard or thin paper and select
the [Std.], do the following:
A
Set the wing guide to the "Down"
position with the user tools. See
"Deflector Angle" in
Mode Setting".
When A4 – B5, 8
is not delivered properly to the paper
delivery tray, do the following:
A Set the wing guide to the "Up" po-
sition with the user tools. See "De-
flector Angle" in
Setting".
TPES520E
TPES530E
P.139 "4.
1
/ " 11" thick paper
2
P.139 "4. Mode