Ricoh Priport JP5000 Operating Instructions Manual page 43

G
Press the { { { { Proof} } } } key and check
the image density and the image
position of the proof print.
Program Clear Modes
Enter
Clear/Stop
Note
If the image position is not cor-
rect, adjust it using the [Image
=] key. See
Print Image Position".
If the image density is slightly
dark or light, adjust the image
density using the {Speed} keys.
See P.26 "Adjusting Print Im-
age Density".
H
Press the { { { { Print} } } } key.
Program Clear Modes
Enter
Clear/Stop
Note
After printing is completed, the
same number of prints is auto-
matically set for the next job.
To stop the machine during a
multi-print run, press the {Clear/
Stop} key.
Auto Cycle
Proof
Print
Start
TPES060N
P.25 "Adjusting
Auto Cycle
Proof
Print
Start
TPES070N
I
Open the paper delivery side
plate of the operation panel side.
Note
You cannot open the side plate
on the opposite side.
J
Remove the prints from the paper
delivery tray.
Note
To return the machine to the ini-
tial condition after printing,
press the {Clear Modes} key.
K
Close the paper delivery side
plate.
Standard Printing
1
TPEH050E
TPEH060E
21