OPTIONAL FUNCTIONS
- Notes about drawing a command sheet
-
-
-
The image might differ depending on how the designated area is drawn, so re-
member the following when making the command sheet:
Designated area
Part of the designated area
2
is surrounded by 3 sides of
the entire area.
Double line pattern.
The designated area is sur-
rounded by 3 sides of an-
other designated area.
Non-closed line
100
Area recognized
Only the outer line is
recognized.
Preferred designated area
Make a space of at least 2 mm,
0.08", in front of the area sur-
rounded by 3 sides (relative to
the feed direction).
1
1, 2 = 2 mm, 0.08"
Make a gap of at least 2 mm, 0.08"
in width.
Make a space of at least 2 mm,
0.08" in front of the area sur-
rounded by 3 sides (relative to
the feeding direction).
2
1
1, 2 = 2 mm, 0.08"
Designate the area with a closed line.
2