Ricoh Priport JP5000 Operating Instructions Manual page 111

A
Prepare the two originals. Set the
first original on the exposure
glass (contact glass).
B
Enter the number of prints with
the Number keys.
Program Clear Modes
Enter
Clear/Stop
C
Press the { { { { Start} } } } key.
Program Clear Modes
Enter
Clear/Stop
D
Check the image position of the
trial or proof print.
Note
If the image position is not cor-
rect, adjust it using the [Image
=] key (see
Print Image Position").
TPEH270E
Auto Cycle
Proof
Print
Start
TPES040N
Auto Cycle
Proof
Print
Start
TPES050N
P.25 "Adjusting
Color Printing Using The Optional Color Drum
E
Press the { { { { Print} } } } key.
Program Clear Modes
Enter
Clear/Stop
F
Remove the prints from the paper
delivery tray and set them on the
paper feed tray again as shown in
the illustration.
G
Exchange the drum unit. See
P.87 "Changing The Color Drum
Unit".
H
Set the second original and press
the { { { { Start} } } } key.
I
Check the image position.
J
Press the { { { { Print} } } } key.
Auto Cycle
Proof
Print
Start
TPES070N
TPEY042E
TPEH101E
89
2