Ricoh Priport JP5000 Operating Instructions Manual page 61

C
Press the [OK] key.
D
Select [Direct. Mag. (size)] with the
[ ] or { { { { } } } } } } } } key.
E
Press the [OK] key.
F
Enter the vertical original size
with the Number keys and press
the { { { { Enter} } } } key.
Program Clear Modes
Enter
Clear/Stop
Note
To change the value entered,
press the {Clear/Stop} key and
enter the new value.
Up to 999 mm, 99.9" can be en-
tered.
G
Enter the vertical print size with
the Number keys and press the
{ { { { Enter} } } } key.
H
Enter the horizontal original size
with the Number keys and press
the { { { { Enter} } } } key.
I
Enter the horizontal print size
with the Number keys.
J
Press the [OK] key.
Directional Magnification—Stretching And Squeezing The Image In 1 % Steps
TPES570E
Auto Cycle
Proof
Print
Start
TPES120N
The machine will select proper re-
production ratios for vertical and
horizontal directions.
K
Make sure that the original and
the print paper are the correct
size.
L
Set your original on the exposure
glass (contact glass) or in the op-
tional document feeder.
M
Press the { { { { Start} } } } key.
Program Clear Modes
Enter
Clear/Stop
N
Check the image position of the
trial or proof print.
Note
If the image position is not cor-
rect, adjust it using the [Image
=] key (see
Print Image Position").
O
Make your prints.
Auto Cycle
Proof
Print
Start
TPES050N
P.25 "Adjusting
39
1