Ricoh Priport JP5000 Operating Instructions Manual page 107

E
Press the { { { { Enter} } } } key.
Program Clear Modes
Enter
Clear/Stop
F
Enter the desired number of
prints for the second original
with the Number keys.
Program Clear Modes
Enter
Clear/Stop
G
Press the { { { { Enter} } } } key.
Note
Repeat steps F and G for each
original.
The number of prints for up to
20 originals can be stored.
H
Press the [OK] key.
I
Set your originals face up in the
document feeder.
Auto Cycle
Proof
Print
Start
TPES020N
Auto Cycle
Proof
Print
Start
TPES040N
TPEH350E
Printing Using The Optional Document Feeder
Note
The originals are fed from the
top of the stack. Make sure that
the originals are set in the cor-
rect sequence with the first orig-
inal on the top.
J
Press the { { { { Start} } } } key.
Program Clear Modes
Enter
Clear/Stop
K
Check the image position of the
trial or proof print.
Note
If the image position is not cor-
rect, adjust it using the [Image
=] key (see
Print Image Position").
L
Press the { { { { Auto Cycle} } } } key.
Program Clear Modes
Enter
Clear/Stop
Note
In Auto Cycle mode, printing
starts automatically after a trial
print is delivered.
Auto Cycle
Proof
Print
Start
TPES050N
P.25 "Adjusting
Auto Cycle
Proof
Print
Start
TPES150N
85
2