Ricoh Priport JP5000 Operating Instructions Manual page 165

No. Mode
18 Ink/Master
Left
19 Type of Paper
20 Auto Rotation
21 Master Cut
Length
Description
Specifies whether you can check the amount of ink and
master.
Note
Default: OFF
Available settings:
• OFF (You cannot check the remaining amount of ink
or master.)
• ON (When the remaining amount of ink or master is
less than half, the panel display indicates these
amounts when you turn on the main switch.)
• Check remaining volume (You can see the remaining
amounts of ink and master regardless of these
amounts.)
When one kind of paper misfeeds occur frequently, you
can register its paper type in [User 1] or [User 2].
Reference
For how to register special paper type, see
19 Type of Paper".
When the direction in which your original is set is different
from that of the paper, and your machine is equipped with
the optional memory board, the machine automatically ro-
tates the original image by 90 to match the paper direction.
You can cancel this setting.
Note
Default: ON
The machine determines the master length according to the
original set number in the optional document feeder and
the paper sizes. If you wish to use A3/11"
gardless of the original set number and the paper sizes, se-
lect "A3".
Note
Default: Auto
User Tools Menu
P.154 "4-
17" master re-
143
3