Master Roll Replacement - Ricoh VT2100 Series Operating Instructions Manual

REPLENISHING SUPPLIES

Master Roll Replacement

The Master End indicator (
Open the original table.
1
Lift the original table release lever
and lift the original table.
Open the right side cover.
2
Lift the pressure release lever in
3
the direction of the arrow to re-
lease the feed roller pressure.
Remove the used master roll and
4
pull out both spools. Then, insert
both spools into a new master
roll.
When the Master End indicator lights,
it is necessary to replace the master
roll even if some master remains on
the old roll.
121
e
) is lit when it is time to replace the master roll.