CR 10-X, CR 12-X, CR 15-X | Operating CR 10-X, CR 12-X and CR 15-X | 51
Reading an Emergency Image Plate
In emergency situations, it is possible to open an emergency exam at the NX
workstation without patient details and to digitize the image plate without
having identified the cassette.
For detailed information about the emergency license, refer to the NX
manuals.
Note: Reading an emergency image plate is a licensed
functionality, necessary to facilitate the emergency cases and to
improve the workflow.
Note: The optical components of the digitizer are switched off
automatically after not been used for 3 hours. Restarting the
digitizer takes approximately 3 minutes. During this time
emergency digitizing is not possible!
2491E EN 20150409 1543