CR 10-X, CR 12-X, CR 15-X | Operating CR 10-X, CR 12-X and CR 15-X | 55
Make sure that the cassette is firmly pushed into the slot, so that it is
locked (you should hear a click). Otherwise, the digitizer cannot read the
image plate.
Figure 10: Inserting 35 cm x 43 cm cassette
1
2
Figure 11: Inserting small cassette
Figure 12: Inserting 24 cm x 30 cm cassette using the cassette adapter
Once the cassette is locked, the status indicator on the digitizer is blinking
yellow.
The digitizer starts reading the initialization data.
5. When the digitizer has finished reading the initialization data, the status
indicator constantly lights up in green and the cassette can be unlocked.
6. Push the Cassette release button and remove the cassette from the cassette
slot.
2491E EN 20150409 1543