Reading An Emergency Image Plate - AGFA CR 75.0 Reference Manual

Reading an emergency image plate

You may have an image plate which you wish to give priority over other image
plates which are being processed by the image processing station. Such
image plates are referred to as 'emergency image plates'.
The emergency status will only be assigned to the first image plate
which you insert into the CR 75.0 cassette slot after pressing the
Emergency key.
To read an emergency image plate:
1
Check that the CR 75.0 is ready for operation:
•
the CR 75.0 must display the operator screen with 'Ready' or 'Busy' status.
VIPS not ready
CR 75.0
•
the status indicator at the top of the CR 75.0 must be constant or flashing green.
# The CR 75.0 is operational if the status field equals 'READY', even if
status messages of the destination are shown (e.g. 'VIPS not ready').
2
Press the Emergency key on the keypad.
The display will read:
Next cassette gets emergency status
CR 75.0
30
EMERGENCY
WARNING
READY
READY
Status field
2241A EN 20040210